GOGASWITCH E-HW Hygrostat / hygrostat
Der Schaltschrankhygrostat wurde speziell zur Überwachung und Regelung der Feuchtigkeit in
Schaltschränken, Getränke- oder Zigarettenautomaten etc. entwickelt und wird auf eine Normschiene nach
EN 50022 montiert. Der Einbau ist lageunabhängig, muss jedoch in einem Gehäuse mit zulässiger
Schutzklasse z.B.: Schaltschrank, erfolgen. / The switch cabinet hygrostat has been specially developed for the
supervision and control of temperatures in switch cabinets, drink or cigarette dispensers, etc. and is installed on a EN 50222
compliant standard rail. It can be installed independent of its position. However, care must be taken to install it in no other but an
enclosure that complies with the protection class admitted for this purpose, such as for a switch cabinet, for example.
Der Schaltschrankhygrostat ist als Umschaltkontakt ausgeführt und kann zum Befeuchten oder
Entfeuchten eingesetzt werden. Die Einstellung des Schaltpunktes wird mittels Schlitzschraubendreher
vorgenommen. Zum Schutz gegen eigenständiges Verstellen des Reglers ist der Knopf in rastender Form
ausgeführt. / The switch cabinet hygrostat described here is a change-over contact type and can be used both for humidifying and
dehumidifying. the setting of the switching point is effected by means of a screw driver for slotted screws. In order to protect the
controller against any inadvertent misadjustment the adjusting knob used with this device is a locking type.
Gehäusematerial / enclosure material: PC Plastik, UL94V-2
Schutzart / protection grade: IP20, EN 60529
Zertifizierung / certification: CE, RoHs, cURus
Temperaturbereich / temperature range: -25°C - +70°C / 95% int. Sensor; -25°C - +80°C / ext. Sensor
Einstellbereich / adjustment range: 10 - 90 %
Montageart / mounting: DIN-Schiene 35 mm / rail
Anschlussart / connection: 0,5 - 2,5 mm² Schraubklemme / screwing clamp
Nennspannung / nominal voltage: 24 VDC, 100 W
Hysterese / hysteresis: Genauigkeit / accuracy +/- 3K
Lebensdauer / lifespan: 100.000 Std.